![]() ![]() Zyxel support suspects my Halo & Son antenna is not compatible with the 3500 MHz range (I checked: the manufacturer claims the antenna covers the 3400-3800 MHz range). When the switch is on EXT position without any external antenna connected, the router works only on 4G/3G/UMTS modes (5G signal could still be received but at a very low level by the external antenna circuit they made tests: 5G signal with the switch on INT RSRP = -65 dBm, 5G signal with the switch on EXT no external antenna connected RSRP = -90 dBm). ![]() 2600 MHz and below) when external antennas are connected and with the switch on EXT position when the switch is on INT position, internal antennas are used for all the ranges of frequency. The external antenna ports are only for frequencies higher than 3500 MHz, and the internal antennas are used for other frequencies (lower than 3500 MHz e.g. As we are at 2.5 km from the emitting antennas with no obstacle between the provider's antennas and our home (there is a small valley in the middle) and at almost the same altitude, the solution of adding an external antenna seemed obvious to try. Furthermore it's impossible to get a 5G link in manual mode (our provider announces 5G NSA service at 700 MHz and 3500 MHz for this station 4G at 700 MHz is well received in manual mode 5G is present in full auto mode of the router but with a worse performance than any 4G mode). But RSRP, RSRQ and SINR are not stable even on short periods of measurement with SINR between -2 and 14 dB. First trials with the integrated antenna resulted in pretty good results in 4G modes at 30 to 110 Mbit/s downloading and 15 to 30 Mbit/s uploading at different hours of the day. Our products are ATEX and IECEx certified for use in explosion proof and intrinsically safe applications, USA & Canada listed for general purpose, non-incendive and explosion proof applications and also MSHA approved for use in US mining operations.We just bought a NR5101 to have a better bandwidth than our poor ADSL line, being at 2.5 km from of a mast of our 4G/5G mobile provider with better speed already than the ADSL line with a simple mobile phone. SOLEXY products are certified by North American and European approval agencies to the environment and hazardous area requirements for both continents. This commitment to excellence has earned us the USA & Canada, MSHA, ATEX and IECEx certifications that make us a world-class company known well for our high quality standards.įrom design to finished product and from sales to shipment, all procedures and processes are organized to give our customers reliable products and a convenient and punctual service. Moreover, every process is controlled during all production phases according to specific standards or internal procedures. We are also supported with an internal laboratory equipped with sophisticated equipment and instrumentation that allow us to execute studies, analysis, simulations and verifications from both a mechanical/dimensional and an electrical/instrumental point of view. Our technical department works with highly sophisticated systems, which include state-of-the-art 3D design software and finite element analysis.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |